Polycom KIRK 14117800 - Manual (Page 166)

166 System Management
14117800, Ed.2.6
1 Under the Configuration menu, click General, and then click admin.
Figure 96 Adm. Page: Configuration/General/Admin/Change Password page
2 In the User name field, type a user name.
3
In the Password field, type a new password, then type the password again in the field
below to confirm it.
4 Click OK to change the password.
10.1.2 Reading System Information
This page provides general system information.
1 Under the Configuration menu, click General.
Figure 97 Adm. Page: Configuration/General/Info page
On the General/Info page you can read information about:
• the used firmware, boot code and hardware
• Serial number; Mac Address of the system
• Coder
• SNTP Server; from which IP address the system receives its time information