Figure 10, Remove back cover from handset with screw fastener, Figure 11 – Polycom KIRK 14117800 User Manual
Page 75: Remove back cover from handset
Preparing KIRK Handset for Use 75
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 10
Remove Back Cover from Handset with Screw Fastener
3
Lift the battery and read the serial number.
4
Replace battery and back cover.
Note:
To show the serial number on the handset display, press *99984*, and then press
3
; the serial number appears on the handset display. Press < for 5 seconds to exit the
menu.
6.6.3 Retrieving Serial Number on KIRK 5020 / 5040 Handsets
1
Press down the back cover and slide it towards the bottom of the handset.
Figure 11
Remove Back Cover from Handset
2
Lift off back cover.
3
Lift the battery and read the serial number.
4
Replace battery and back cover.
Note:
To show the serial number on the handset display (5020 / 5040 Handset), press
Menu, select Status and then select Firmware version. Press exit to exit the menu.