Polycom KIRK 14117800 User Manual
Page 155
KIRK Handset Registration and Subscription 155
KIRK Wireless Server 600v3 Installation and Configuration Guide
Note:
To make subscriptions, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system currently
permits subscription, you will need to know the ID of the system (ARI code) to which
you wish to subscribe. Authentication Codes and system ID’s (ARI codes) will be
provided by the system administrator.
Before subscribing handsets you need to ensure:
•
that handset battery has been charged (
). Low battery could cause subscription problems.
•
that the handsets have been registered to the system (
“Registering KIRK Handsets” on page 145
).
8.2.2.1 Subscribing Handsets
1
Press MENU - go to MENU LOGIN.
2
Press 3 - go to SUBSCRIPTION CREATE to subscribe to a system.
3
Press 3. The handset searches for the serial number of the system.
4
Use the < > keys to scroll between the IDs systems if there is more than one system
available.
During subscription, the handset searches for free positions and performs
subscription on the first free position.
5
As soon as the correct serial number of the system appears in the display, press 3.
The serial number is located on the label on the rear of the KWS600v3.
6
Enter the AC (if required) using the keyboard, and press 3.
An antenna symbol appears on the display to indicate a successful subscription. If
not, the subscription has failed and the procedure must be retried.
8.2.2.2 Subscribing a Handset to Different Systems
The handset can be subscribed (connected) to a maximum of 10 different systems.
Note:
To be able to log on to a system, subscription to the system must be established.
8.2.2.2.1 Changing to another System Automatically Using Auto Login A
Note:
Auto Login A should only be used when systems are separate, with no overlaps.
1
Press MENU - go to MENU LOGIN.
2
Press 3 - go to SELECT LOGIN.