Polycom KIRK 14117800 - Manual (Page 114)

114 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
7.6.4.5 Configuring DECT Master
(Secondary)
On the Master page you need to define the KWS600v3 as a Secondary KWS600v3.
1
Under the Configuration menu, click DECT, and then click Master.
Figure 55 Adm. Page: Configuration/DECT/Master page
2
From the Mode list, select Off. Selecting Off defines the KWS600v3 as a Secondary.
3 Check that the protocol H323 is selected from the Protocol list.
Note:
The H.323 Protocol is always used for internal communication between
KWS600v3 secondaries, regardless of the protocol used in the Master KWS600v3.
4 Click OK.
5 Click Reset (under Administration menu) to save your configuration.