beautypg.com

Printronix ThermaLine Series User Manual

Page 37

background image

2–7

Configuration

UPC Descenders

This parameter allows you to leave a gap for human readable data in the

UPC/EAN bar codes.

Disable. The IGP/PGL does not leave a gap if there is no human readable

data.

Enable. The default. The IGP/PGL leaves a gap, even if there is no human

readable data.

Host Form Length

This parameter determines which page length setting (the one specified in

the Create Form mode or the one set on the printer) will be used when you

send an Execute (print) command.

Enable. The page length set in the Create Form mode is used. This is the

default.

Disable. The page length set on the printer will be used.

IGP

100

Compatibility

This parameter is used to make PGL compatible to the original IGP

100

in

cases such as exact positioning of text, etc.

Disable. Does not change PGL behavior. This is the default value.

Enable. Makes PGL behavior compatible to that of IGP

100

.