Printronix ThermaLine Series - Manual (Page 263)

5–125 Bar Codes
To use the repeat count parameter, enter RPT and
replace n with a numeric value ranging from 1 to
65,535 to specify the repeat count.
The default repeat count parameter is 1, which will
increment the field value each time it is printed.
RSTn The optional incremental reset count parameter to
specify the number of times an incremented field is
printed (on one or more forms) before it is reset to the
starting value. A reset count is useful when printing a
hierarchy of fields where a low–level field generates a
sequence of numbers, is reset, and the next higher field
level is incremented (such as in a unit/box/carton
application).
To use the reset count parameter, enter RST and
replace n with a number ranging from 1 to 65,535 to
specify the reset count. The default reset count value
is 0.
STARTDATA Defines the starting value of the incrementing field.
The maximum amount of STARTDATA characters
must be less than or equal to the number of characters
in the STEPMASK field. Characters allowed for
incrementing fields is based on the type of bar code;
refer to the individual bar code descriptions for
information on valid type and quantity of data
characters.
The STARTDATA must be enclosed within standard
printable character delimiters just as a standard bar
code data field is enclosed within delimiters.