Paper – Printronix ThermaLine Series User Manual
Page 123
4–79
Commands
Paper
Purpose
Controls the printer cutter, print intensity, label sensor, page orientation
(portrait/landscape), and print speed.
Mode
NORMAL, EXECUTE
NOTE:
More than one option may follow the paper command.
Format
(cc)PAPER [;option[ #]]
NOTE:
Not all options may be available with your printer. Consult your printer’s
Setup Guide to determine which options are available. If an option is not
available, the emulation will ignore the corresponding command.
(cc)
The Special Function Control Character.
PAPER
The PAPER command; enter PAPER. Refer to
Table 4–3, on page 4–80.
CUT #
Sets the printer to cut a label after a specified number
of labels. Enter CUT, a space, and a number in the
range of 1 to 100 (1 implies no cutting).
EJECT
Prints all labels that are in the buffer. Enter EJECT.
INTENSITY #
Specifies the darkness of the dots. Enter INTENSITY,
a space, and a number in the range of –10 to +10.
LABELS #
Specifies the label sensor. Enter LABELS, then a
space, then a number: 0 = disable; 1 = Reflective
Sensor; 2 = Transmissive Sensor.
LANDSCAPE
Identifies the selected paper cassette in the landscape
orientation. Enter LANDSCAPE. See ROTATE.
PORTRAIT
Identifies the selected paper cassette in the portrait
(default) orientation. Enter PORTRAIT. See
ROTATE.