Printronix ThermaLine Series - Manual (Page 137)

4–93 Commands
Comments The size and number of raster image logos are bounded by printer memory.
The logo call command in the Create Form mode brings the predefined
logo into a form. The starting row and column parameters refer to the upper
left corner of the logo grid. Once created, the logo is ready to be used in
any form and will print at the size shown.
Raster images may contain data that is interpreted by your host as control
codes. This may affect the way the host sends data to the printer. Consult
your host’s Setup Guide for sending binary data.
Be careful when editing TIFF output files because most TEXT editors
insert carriage returns and line feeds. If a TIFF file must be edited, use a
binary or hex editor.
NOTE: Be careful sending TIFF data. The LOGO line must be terminated
and then the TIFF data must follow immediately (with no extra
CR/LF’s). Otherwise, improper operation will result.