beautypg.com

Printronix ThermaLine Series User Manual

Page 209

background image

5–71

Bar Codes

FIM

The FIM (Facing Identification Mark) bar code structure is shown in

Figure 5–14 and Figure 5–15 and described on the following pages. The left

boundary must begin 3 inches from the right edge of the mail piece. The

right–most bar must be 2 inches

±

1/8–inch from the right edge of the mail

piece. Bars must be 5/8–inch

±

1/8–inch tall; the top of the bars must be no

lower than 1/8–inch from the top edge of the mail piece (and may touch the

top edge of the mail piece). The bar code baseline must be within 1/8–inch

from the bottom edge of the clear zone.

Return Address Area

5/8”

1–1/4”

(Optional Line)

(Top Line)

(Optional Line)

(Line

Above Last)

(Last Line)

NON–ADDRESS DATA
NAME OF RECIPIENT
INFORMATION/ATTENTION LINE
DELIVERY ADDRESS
POST OFFICE STATE ZIP

SR, SC

POSITION

1–3/4”

Clear

3”

1/8”

2”– 1–7/8”

NOTE: Illustration is not to scale

Zone

Figure 5–14. FIM Structure