Printronix ThermaLine Series - Manual (Page 266)

Bar Codes 5–128
c. Replace L with a number equal to the number of
characters in the dynamic bar code string
(STARTDATA) ranging from 1 to 1024. The
number of characters and type of characters
depends on the type of bar code used. Refer to
the individual bar code descriptions for
information on type and quantity of data allowed
for the specific bar code type.
d. Dynamically enter the STEPMASK and
STARTDATA parameters in the Execute Form
Mode. The length of the data must be less than
or equal to the value assigned to the length (L)
parameter. Refer to “Execute Form: Incremental
Dynamic Data” on page 4–56 in the
“Commands” chapter for more information.
Duplicating Incremental Bar Code Fields
Fixed and dynamic incremental bar code data fields are duplicated
horizontally and vertically in the same way that incremental alphanumeric
fixed and dynamic data fields are duplicated. Refer to page 4–26 in the
“Commands” chapter for more information on duplicating incremental data.