Printronix ThermaLine Series - Manual (Page 110)

Commands 4–66
Line Spacing
Purpose Defines the lines per inch (lpi) printing format.
Mode NORMAL, EXECUTE
Format (cc)LPI; n
(cc) The Special Function Control Character.
LPI The Vertical Line Spacing command; enter LPI.
n Selects the line spacing in lpi; enter any integer value
from 1 to 10.
Comments Standard line spacing is 6 lpi. After a Vertical Line Spacing command is
entered, all subsequent alphanumerics print at the specified lpi until another
Vertical Line Spacing command, a Normal mode command, or a Reset
command is entered.
Example The following command selects 9 lpi printing format until another Line
Spacing command, a Normal mode command, or a Reset command is
entered.
~LPI;9