Lucent Technologies P550 - Manual (Page 60)

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3-14 Cajun P550/P220 Switch Operation Guide
To configure switch port parameters:
1. In the System Configuration section of the Web Agent window, select Modules
& Ports. The Module Information dialog box opens.
2. From the Model Number column, locate the module for which you want to
configure ports. Click the Switch Ports column next to the selected module. The
Switch Ports dialog box opens.
3. In the Name column, click the name for the port you want to configure. The
Switch Port Configuration dialog box opens.
Figure 3-4. Switch Port Configuration Dialog Box
Refer to “Configuring Port VLAN Parameters” and “Configuring Non-VLAN Switch
Port Parameters”, later in this chapter, for your specific configuration needs.