Lucent Technologies P550 - Manual (Page 256)

Managing Intelligent Multicasting (Layer 2 & Layer 3)
15-10 Cajun P550/P220 Switch Operation Guide
3. Use Table 15-6 to configure the new multicast session.
4. Click CREATE to create the new static multicast session, or CANCEL to restore
previous settings.
Deleting Static Multicast Sessions
To delete a static multicast session:
1. In the Intelligent Multicasting section of the Web Agent window, click Static
Sessions. The Static Multicast Sessions dialog box opens.
2. Use Table 15-7 for more information on static multicast sessions.
Table 15-7. Static Multicast Sessions Parameters
3. Click DELETE to remove your selected static multicast session, or CANCEL to
restore previous settings.
Table 15-6. Static Multicast Session Configuration Parameters
Parameter Definition
IP Address The IP address of the new static multicast session. The
range must be between 224.0.1.0 to 239.255.255.255.
MAC Address Enter the MAC address of the new static multicast session.
Specifying the MAC address is not used for an IP multicast
session.
VLAN Enter the VLAN associated with the new multicast session.
Click All to add all VLANs to the multicast session, or select
a specific VLAN from the pull-down menu.
Parameter Definition
Select Select the static multicast session to be modified.
VLAN Displays the VLAN on which the static multicast session exists.
MAC Address Displays the MAC address of the static multicast session.
IP Address Displays the IP address associated with the static multicast session,
if available.
Static Client Ports Displays the number of static client ports associated with the static
multicast session and opens the Static Multicast Session Client
Ports dialog box.