Lucent Technologies P550 - Manual (Page 109)

Configuring IPX Routing (Layer 3)
Cajun P550/P220 Switch Operation Guide 4-13
3. Use Table 4-10 to determine the search parameters:
4. Click Search to start the search. If available services are found they are displayed
in IPX Service Table dialog box. In services are not available, a message displays in
the IPX Service Table dialog box.
Examining the IPX Service Table
To examine the IPX service table:
1. Perform an IPX Service table search as described in "Searching the IPX Service
Table", earlier in this chapter. If available services are found they are displayed in
the IPX Service Table dialog box.
Table 4-10. IPX Service Table Search Parameters
Parameter Allows you to perform a search...
Source In your IPX service table, use one of the following
parameters:
• SAP - Services learned via the SAP protocol
• Static - User configuration
• Local - Local services
Once you select one of these parameters, the search
will attempt to find services associated with the
parameter you chose.
Interface Based on the interface associated with the next-hop to
the service.
Service Name Based on a service name you specify. Note that you
can specify a single asterisk (*) to indicate a wildcard
character that will match all characters entered before
the wildcard. For example, entering FS_ENG* will find
all service names that start with FS_ENG.
Service Type Based on the service type you specify. For example, to
specify a print queue type, you would enter 3 (0003h)
in the space provided.