Lucent Technologies P550 - Manual (Page 121)

Configuring IPX SAP Protocol (Layer 3)
Cajun P550/P220 Switch Operation Guide 6-3
2. Click CREATE to create a new filter. The Add IPX SAP Name Filter dialog box
opens.
3. Use Table 6-2 to complete your configuration:
Table 6-2. IPX SAP Name Filter Parameters
Parameter Allows you to...
Interface Select the interface to which this filter will be applied to SAP
packets sent and/or received on the interface.
Precedence Specify the filter precedence (in order of importance) with 0 equal
to most important.
Note: All SAP filters on the same interface must be
assigned a unique precedence value.
Name Specify a service name. For example, FS_ENG001. A single asterisk
may be present as the last character, which will match all remaining
characters of a service name.
Type Specify the service type that identifies the type of service the server
provides.
Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services [NDS] (278)
A value of ffff matches all service type values.
Direction Select the direction of the filter in question.
Filter choices include:
• Inbound - Applies the filter only to SAP packets received on
the interface.
• Outbound - Applies the filter only to SAP packets sent on the
interface.
• Both - Applies the filter to SAP packets both sent and received
on the interface.