Lucent Technologies P550 - Manual (Page 104)

Configuring IPX Routing (Layer 3)
4-8 Cajun P550/P220 Switch Operation Guide
3. Use Table 4-5 to complete your configuration:
Deleting IPX Static Service
To delete an IPX static service:
1. From the IPX Configuration section of the Web Agent window, click Static
Services. The IPX Static Services dialog box opens.
2. Select the IPX static service to be removed.
3. Click DELETE to remove the static service, or CANCEL to restore previous
settings.
Table 4-5. IPX Static Service Parameters
Parameter Allows you to specify the...
Service Name Name of the IPX static service. For example, FS_ENG01. Use SLIST
(NetWare 3.x) or NLIST (NetWare 4.x) to list your current server
names and types from your NetWare server.
Type Service type (in hex) that identifies the type of IPX static service the
server provides. Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Network Network number (in hex) of the IPX static service.
Node Node address (in hex) of the IPX static service.
The format of the node value is aa:bb:cc:dd:ee:ff.
Socket Number (in hex) associated with a running process on the end node
(for example, RIP, NLSP).
Next-Hop Node MAC address of the next destination through which the service is
reached.
The format of the node value is aa:bb:cc:dd:ee:ff.
Interface Interface that corresponds to the next-hop node.
Hops Number of routers (hops) that the packet must pass through before
reaching the network number associated with the service.