Sierra Wireless 20070914 - Manual (Page 99)

Global Positioning System (GPS)
Rev 3.0B Feb.08 86
• NAD83
• NAD27
Before you Configure GPS
To decide what configuration you need for your PinPoint X,
there are some fundamental considerations you should
determine:
• Protocol: What is the GPS protocol used by your tracking
application and what type of reports will you need?
• Datum: What is the datum supported by your tracking
application?
• Dynamic IP Address: Will you need DNS support to
handle a dynamic IP address account?
Configuring the PinPoint X for
GPS
This section covers general configuration. Configurations for
specific protocols are covered in later sections.
To configure your modem’s GPS settings, you can use either
AceManager or a terminal connection to configure the modem
using AT commands. The configuration examples in this
chapter all use AceManager. Most of the settings are in the
group: PinPoint.