Configuring a pppoe connection in windows, Configuring a pppoe, Connection in windows – Sierra Wireless 20070914 User Manual
Page 176: Write the configured settings to your pinpoint x, Create a new network connection
PPP over Ethernet (PPPoE)
Rev 3.0B Feb.08
163
b.
Enter a name for *MODEMNAME, such as PinPoint X
or the ESN.
Figure 2-2: AceManager : Dynamic IP
Tip: The name you choose will not affect the connection but may
need to be configured in PPPoE settings for the router, device or
computer you will be connecting to your PinPoint X.
3. Write the configured settings to your
PinPoint X
a.
Click the Write button on the tool bar of AceManager
and wait for the message “Write Successful” to appear
in the status bar.
Figure 2-3: AceManager : Write
b.
Press the modem Reset button on the front of the
modem. Wait until the Network indicator is lit and the
modem has once again registered on the network.
Configuring a PPPoE
Connection in Windows
1. Create a new network connection
a.
Select Start > Connect To > Show All Connections. This
will open the Network Connections window.