Sierra Wireless 20070914 - Manual (Page 166)

Configuration Commands
Rev 3.0B Feb.08 153
*PPFLUSHONEVT=n
Flushes store and forward buffer when an input event (DTR/
RTS) occurs.
• n=0 : Disable
• n=1 : Enable
*PPGPSDATUM=n
Specifies the GPS datum to use for position reports. For
accurate results, this value should match the datum used by
receiving mapping application.
• n=0 : WGS84
• n=92 : NAD27
• n=115 : NAD83
*PPGPSSENTENCES=n
Specifies the NMEA sentences to display in the NMEA GPS
Report.
• n=0‐65535 (hex)
*PPGPSR=n
GPS report type.
• n=0x11 : Standard GPS Report
• n=0x12 : Standard GPS Report + UTC Date
• n=0x13 : Standard GPS Report + UTC Date + RF data
• n=0xE0 : GGA and VTG NMEA reports
• n=0xE1 : GGA, VTG and RMC NMEA reports
• n=0xF0 : TAIP reports
• n=0xF1 : Compact TAIP data
*PPIGNOREIP=n
When enabled, ignore ATS Server IP (*PPIP) updates in RAP.
• n=0 : Use ATS Server IP updates.
• n=1 : Ignore ATS Server IP updates.
*PPINPUTEVT=n
Enable sending input changes as events (different report
types).
• n=0 : Disable
• n=1 : Enable