Configure your pinpoint x to support pppoe, Optional: configure *modemname – Sierra Wireless 20070914 User Manual
Page 175
PPP over Ethernet (PPPoE)
Rev 3.0B Feb.08
162
1. Configure your PinPoint X to support
PPPoE
a.
Connect your PinPoint X directly to your computer
and start AceManager.
b.
From the groups on the left, select PPP/Ethernet under
Common.
Figure 2-1: AceManager : PPP/Ethernet
c.
Change *HOSTAUTH to 2.
d.
Enter a user name for *HOSTUID for the PPPoE
connection.
e.
Enter a password for *HOSTPW for the PPPoE to
connection.
f.
Change *DHCPSERVER to 0
Tip: If you leave *HOSTUID and *HOSTPW blank, any computer or
device can connect to the PinPoint modem using PPPoE.
Note: AceManager shows the existing values for *HOSTUID and
*HOSTPW encrypted and character padded.
2. Optional: Configure *MODEMNAME
PPPoE connections can use a Service Name to differentiate
PPPoE devices.
a.
In AceManager, select Dynamic IP from the groups on
the left.