Sierra Wireless 20070914 - Manual (Page 57)

Universal Serial Bus (USB)
Rev 3.0B Feb.08 44
c. Click Finish to complete the installation. The driver
should be enabled without any need to reboot your
computer.
Figure 6-6: Hardware Wizard : Finish
Note: If you are already connected to the modem with an Ethernet
cable, when you complete the installation of the USB Ethernet driver,
your computer will not use the USB connection initially. You may need
to reboot your computer before you can use the USB port as an
Ethernet connection to the modem.
4. Optional: Verify and Configure the
Virtual Port Settings
Virtual Ethernet
The USB Ethernet connection will show up in your Network
Connections as a Local Area Connection.
Tip: If you also have an Ethernet card on the computer or have
installed the USB Ethernet to more than one USB port on your
computer, the USB Ethernet may show up with a number.
Figure 6-7: Network Connections