Sierra Wireless 20070914 - Manual (Page 107)

Global Positioning System (GPS)
Rev 3.0B Feb.08 94
12 ‐ GPS + Date ‐ GPS data with the UTC time and
date
13 ‐ GPS + Date + RF ‐ GPS data with the UTC time
and date and Radio Frequency information from the
antenna.
Figure 10-15: AceManager : PinPoint - *PPGPSR
Tip: If your AVL host server uses a dynamic IP address or needs to
change its IP address for any reason, you can use the RAP configu-
ration command to change the value for *PPIP.
RAP Reports over a Local Connection
Local reports are sent to the local IP address of the computer or
device connected directly to a port on the PinPoint X. The
reports are sent using PPP or SLIP for serial or USB virtual
serial. To configure the modem to send reports to the local IP
address, you will need to set 3 commands: S53 in the Misc
group and *PPLATS and *PPLATSR in the PinPoint group.
a. Set the S53 port to the local port to which you want the
reports sent. The local IP address will automatically be
used.
Figure 10-16: AceManager : Misc - S53