Sierra Wireless 20070914 - Manual (Page 181)

PPP over Ethernet (PPPoE)
Rev 3.0B Feb.08 168
2. Configure the PPPoE connection
After you complete the New Connection Wizard, there are a
few more things you will want to configure in the connection.
a. Select Properties.
Figure 2-13: PPPoE Connection
b. Optional: On the General tab, if you gave the modem a
name with *MODEMNAME above, you can type in
that name as the Service Name.
Figure 2-14: PPPoE Connection : Service Name
c. Select Networking.
d. Select Settings.
Same as *MODEMNAME configured earlier