Using the virtual ethernet port, Using the virtual, Ethernet port – Sierra Wireless 20070914 User Manual
Page 62

Universal Serial Bus (USB)
Rev 3.0B Feb.08
49
Figure 6-14: Advanced Settings
Using the Virtual Ethernet Port
Once the driver is installed, you can use the USB port just like
a standard Ethernet port.
Using USB Ethernet with AceManager
In AceManager, use the UDP or TCP connection and enter the
IP address of the modem (192.168.13.31 by default) and the
password (12345 by default).
Figure 6-15: AceManager : TCP
Using USB Ethernet with a Terminal Emulation Utility
Configure your terminal application for telnet communication.
a.
In HyperTerminal, select TCP/IP (Winsock)
b.
Use the IP address of the modem (192.168.13.31 by
default) as the destination and use the telnet port of
the modem (2332 by default).