Sierra Wireless 20070914 - Manual (Page 30)

Activating PinPoint X on AT&T Network
Rev 3.0B Feb.08 17
Figure 3-6: Inserting the SIM
7. Finishing the SIM installation
Replace the cover to prevent dust or other unwanted particles
from entering the PinPoint X. Once the cover is replaced, the
installation is complete.
Note: The first time you power on your Raven-E with your new SIM,
there may be a delay of up to 10 minutes for the initial network
connection to occur.
Configuring the APN
The APN (Access Point Name) is the way your modem knows
how it will be communicating with the network. The APN
allows custom IP addressing and tailoring your companyʹs
wireless IP solution to meet the security and IP addressing
requirements of your applications.
Note: Most accounts use the default addressing solution of Private or
Public IP addresses supplied by the Internet and Proxy APNs. Only if
you have a Static or Custom IP address should you need to configure
a custom APNs.
The default APN is Internet. If you need a different APN, use
can use AceManager to configure it.