Sierra Wireless 20070914 - Manual (Page 164)

Configuration Commands
Rev 3.0B Feb.08 151
• n=1 : Log client events (default)
• n=2 : Log server events
• n=3 : Log client and Server events
PinPoint (GPS)
This group includes commands specific to GPS features and
the PinPoint X
Figure 1-19: AceManager : PinPoint
GPSn
Send NMEA GPS strings out serial link. ATGPS (no parameter)
will cause the NMEA GGA, RMC, and VTG GPS strings to
output to the serial port one time. Not available in AceManager.
• n=1 : ATGPS1 will cause these strings to be sent out the
serial link once per second continuously until ATGPS or
until reset.
#IG=n
Time in seconds to wait for GPS acquisition before trans‐
mitting at high rates.
• n=seconds