Sierra Wireless 20070914 - Manual (Page 108)

Global Positioning System (GPS)
Rev 3.0B Feb.08 95
b. Set the Local Report Type, using *PPLATSR, to your
preferred RAP report type.
Figure 10-17: AceManager : PinPoint - *PPLATSR
11 ‐ GPS ‐ Global Positioning System data
12 ‐ GPS + Date ‐ GPS data with the UTC time and
date
13 ‐ GPS + Date + RF ‐ GPS data with the UTC time
and date and Radio Frequency information from the
antenna.
c. Set Local Reporting Time Interval, using *PPLATS, to
the number of seconds you want as an interval
between reports being sent.
Tip: If *PPLATS is set to 0, reports will only be sent if a poll command
is issued by the local client.
Figure 10-18: AceManager : PinPoint - *PPLATS
Configuring Additional RAP Features
RAP allows additional information to be sent with the reports
to enable a richer tracking feature set.
Device ID
By enabling *PPDEVID, a device ID of the PinPoint X is sent as
part of the RAP message to make identification easier in a
network or fleet of vehicles equipped with PinPoint line
devices.
Figure 10-19: AceManager : PinPoint - *PPDEVID
With *PPDEVID enabled, the PinPoint X will use the value
configured for *NETPHONE for the device ID. If *NETPHONE
is empty, the ESN of the modem will be used.