Sierra Wireless 20070914 - Manual (Page 58)

Universal Serial Bus (USB)
Rev 3.0B Feb.08 45
You can also verify the installation by looking in the Device
Manager.
a. Click on Start > Control Panel.
b. Double‐click on the System icon.
c. Select the Hardware tab and click the Device Manager
button.
Figure 6-8: System Properties
d. Click on the + in front of Network Adapters.
The newly installed driver, AirLink USB Ethernet/RNDIS,
should be displayed. If the driver is displayed with a # and
number behind the driver name (such as, AirLink USB
Ethernet/RNDIS #2), it means more than one is installed on
your computer, most likely for different USB port. More than
one copy of the driver should not cause any problems since
only the connected port and its driver would be active.