Sierra Wireless 20070914 - Manual (Page 137)

Configuration Commands
Rev 3.0B Feb.08 124
OPRG=n
Enables/disables over‐the‐air firmware upgrading of the
PinPoint X. When Sierra Wireless releases a new version of
ALEOS, you can upgrade your remote modems with OPRG
enabled.
• n=0 : Disables
• n=1 : Enables
S53=[method][d.d.d.d][/ppppp]
Destination IP address, port, and method. These are used as
defaults for the D (Dial) AT command.
• method= P : UDP
• method=T : TCP
• method=N : Telnet
• d.d.d.d=IP address or domain name
• ppppp=the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
Z
Reset the PinPoint X. In AceManager, this command is
performed with the Reset option on the toolbar.
Tip: *DATZ=1 will disable Z.
&W
Writes all changed modem settings. If this command is not
issued, any modified values will revert back to their previous
values at modem reset. Cannot be configured in AceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Sets and queries the internal clock. Either the date and time
can be specified, or simply one of the two can be specified in
which case the unspecified value will remain unchanged. The
date and time are always specified 24‐hour notation.
• mm/dd/yyyy=date in month/day/year notation