Sierra Wireless 20070914 - Manual (Page 155)

Configuration Commands
Rev 3.0B Feb.08 142
SMS (Short Message Service) is another way to send messages
via the cellular network. Most SMS commands require the
modem to be in PassThru mode.
Note: SMS may not be supported by your account with your cellular
carrier.
Figure 1-14: AceManager : SMTP
*NETSMS2EMAIL=n
Specify the SMS/E‐mail server number. This maybe necessary
to send an SMS message to an email address. Cannot be used
with AceManager.
• n=SMS/E‐mail server number
*SMTPADDR=[d.d.d.d][name]
Specify the IP address or Fully Qualified Domain Name
(FQDN) of the SMTP server to use.
• d.d.d.d=IP Address
• name=domain name (maximum: 40 characters).
*SMTPFROM=email
Sets the email address from which the SMTP message is being
sent.
• email=email address (maximum: 30 characters).
*SMTPPW=pw
Sets the password to use when authenticating the email
account (*SMTPFROM) with the server (*SMTPADDR).
• pw= password
Note: Not required to use SMTP settings but may be required by your
cellular carrier.