Siemens Commissioning PC Stations C79000-G8976-C156-07 - Manual (Page 217)

16 Configuration Console Tool
217
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
16.2.6 Language Setting
As of the SIMATIC NET CD 2005 (V6.3), it is now possible to change the language
of the program user interface after installation.
To adopt the modified language setting it may be necessary to restart programs or
restart the computer.
Follow the steps below to change the language setting:
Step Activity
1. Click on the “Language Setting” folder in the navigation area.
2. Select the required language.
The list includes all available languages. The currently set language is indicated by the check
mark in the check box.
If the check box ”Adopt language setting from SIMATIC Manager“ is selected, the language of
the SIMATIC NET tools will be set to the language selected for the SIMATIC Manager. This is
only possible if the language is included in the list. Otherwise, the language selected in the
”Language” list will continue to be used.
Clear the check box if you do not want to adopt the language setting from the SIMATIC
Manager
3. “Apply” the settings.