IBM Oce TDS800 - Manual (Page 65)

Using the Océ TDS800 to Copy 65
Stamping
Stamping is an Océ TDS800 option which allows you to print a predefined text
on all your copies. Enable stamping with a password in the Océ Setting Editor.
The key operator can predefine a maximum of 50 stamps in the Océ Settings
Editor (see ‘Find system settings in the Settings Editor’ on page 139).
You can select one stamp per original and you can select a colour, font size or
position. A stamp can consist of the following parts:
■ predefined text
■ date
■ time
▼ How to select a stamp
1 Open the ‘Stamping’ card in the ‘Print’ section.
2 Select stamp ‘On’ with the ‘Enable’ function key.
3 Select a stamp with the ‘Select stamp’ function key.
Note: the following steps are optional.
4 Select a ‘Colour’ with the ‘Format stamp’ function key and the arrow keys.
5 Select a ‘Size’ with the ‘Format stamp’ function key and the arrow keys.
6 Select a position with the ‘Stamp position’ function key and the arrow keys.