IBM Oce TDS800 - Manual (Page 111)

Special copy and scan jobs 111
Make a set copy
Set copy is an input mode which enables you to make one job out of multiple
originals. It is distinguished from the ‘Multiple sheets’ input mode by the way
the job is sorted. See page 58 for a description of the input modes.
▼ Make a set copy
1 Open the ‘Feeding’ card in the ‘Original’ section.
2 Use the ‘Input mode’ function key to select ‘Set‘.
3 Make other settings as required and feed the original.
4 Press the green Start key to start the copy job.
Your original is fed into the scanner. The printer starts.
5 Feed the other originals that make up your set.
When ‘Automatic feed’ is enabled, you do not have to press the green Start key
everytime you feed an original.
6 When all originals are scanned, press the green Start key to close the set.
7 When you want to abort your job, press the red Stop key. When you press the
red stop key, the entire job is deleted.