IBM Oce TDS800 - Manual (Page 16)

16 Océ TDS800 User Manual
Spool memory The Océ TDS800 contains a spool memory which provides a
queuing system for files you want to print. The spool memory allows multiple
users to send print jobs to the Océ TDS800 at the same time. The print jobs are
then placed in the print queue where they wait to be printed. The job that is put
first into the queue is printed first.
Job recovery The Océ TDS800 is equipped with a job recovery function that
safeguards users against data loss in case of a printer failure. After a restart, the
data submitted to the printer before the crash is automatically processed and
printed. This means that jobs do not have to be re-submitted after a printer
malfunction.This saves valuable time for the users.
Green key principle The Océ TDS800 is a very user-friendly system. The
scanner, in particular, is very easy to operate. Basic copy jobs can be performed
by simply pressing the green start key on the scanner operator panel. Only if
you want to perform more complex copy jobs, you have to change the default
copy settings with the help of the other settings on the scanner operator panel.
User interaction
The user can communicate with the Océ TDS800 both local on the system and
from remote locations:
Operator panels The Océ TDS800 consists of two operator panels for making
a wide variety of settings for printing and copying. See ‘Printer operator panel’
on page 243 and ‘Scanner operator panel’ on page 244 for more information.
Controller applications The Océ TDS800 controller applications are used for
making default key operator and system administrator settings (Océ Settings
Editor). For viewing the status of the jobs in the print queue you use the Océ
Queue Manager. The Océ System Control Panel shows the status of the entire
system.
Océ Scan logic® With ‘Océ Scan logic ® ’ you can define all relevant settings
for scan to file. See ‘Océ Scan Logic®’ on page 70 for more information.
Océ Remote Logic® With Océ Remote Logic ® you can perform the following
actions from any PC connected to the network and with Océ Remote Logic ®
software installed:
■
Remotely view system status (Océ System Control Panel).