IBM Oce TDS800 - Manual (Page 131)

Océ Power Logic®: Settings Editor 131
Settings area
The settings area consists of two parts: a setting tree and an update area.
Tree structure Most settings are displayed using a tree structure. By clicking
on the settings, folders can be opened to show all the entries or closed to hide
all the entries below these folders.
The settings for system components that are not available are not displayed.
So, if you do not have a folder, no folder settings are available. This means that
different configurations result in different tree structures.
Note: When a tree item has been changed, this item will be marked with a
bullet.
Update area Select a setting in the tree structure. Edit the setting in the update
area.
Note: If the user is not authorised for a particular setting, the update area is
grayed out and no changes can be made.
Note that a few settings, such as basic card and pen settings, are not edited from
the tree structure, but are accessed directly from the settings area.
The update area contains some additional information about the selected
setting. This includes a brief description of the setting, as well as the minimum,
maximum and default values (if applicable).
[67] Settings area