IBM Oce TDS800 - Manual (Page 101)

Special copy and scan jobs 101
▼ Copying with removed filing strip along the right hand side
1 Select one of the roll selection keys on the operator panel.
2 Select the 100% key.
3 Make sure the ‘auto zoom’, ‘auto roll’, and ‘Scan width’ are not selected.
4 Make other settings as required.
Feed the original.
Leading and trailing strip It is possible to adjust the length of both the leading
and trailing strip to eliminate or add a filing strip. Leading and trailing strips
can be extended up to 400 mm or shortened up to 400 mm (see Figure 49).
[49] Example of adjusting the leading and trailing strip of an original
Leading strip
-400 mm
Leading strip
+400 mm
Trailing strip
-400 mm Trailing strip
+400 mm