IBM Oce TDS800 - Manual (Page 157)

Océ Power Logic®: Remote Logic 157
Installation procedure for Microsoft®
Windows systems
Before you install Océ Remote Logic®, you must take note of the following
minimum system requirements for the remote system. The system must be a
Pentium® 233 with 32 Mb RAM running Windows® 95, 98, NT® (service
pack 3),Windows® 2000 or XP.
Océ Remote Logic® (Océ Queue Manager, Océ System Control Panel and
Océ Settings Editor) are on the Océ TDS800 CD-ROM and on the Océ Power
Logic Controller® CD-ROM provided with the system. The installation
procedure for Océ Remote Logic® is quite simple and self-explanatory. When
you select the ‘Install remote applications’ option on the CD-ROM, a Wizard
starts to guide you through the installation process. When the installation
process is complete you do not have to restart your system.
Note: Océ Remote Logic only works when TCP/IP is enabled on your system.
Refer to your system administrator for assistance with the installation
procedure for TCP/IP.