IBM Oce TDS800 - Manual (Page 39)

Using the Océ TDS800 to print 39
Stopping a print job
The red ‘Stop’ key on the Océ TDS800 Printer operator panel interrupts the
active print process. You can cancel or continue the current print job.
▼ Cancel a print job
1 Press the ‘Stop’ key.
A dialog is displayed informing you that you can press ‘On-line’ to continue
or press the ‘Stop’ key to cancel the job.
2 Press the ‘Stop’ key again to cancel the current job.
Note: Printing is stopped at the end of a page. Started prints are finished.
▼ Continue a print job
1 Press the ‘Stop’ key.
A dialog is displayed informing you that you can press ‘On-line’ to continue
or press the ‘Stop’ key to cancel the job.
2 Press the ‘On-line’ key to continue the current print job