IBM Oce TDS800 - Manual (Page 58)

58 Océ TDS800 User Manual
Select the input mode
You can use the ‘Input mode’ setting to specify how a job will be sorted: the
‘Single sheet’ option treats each sheet as a separate job. ‘Multiple sheets’
produces the specified number of copies for each sheet in a job and then
continues with the next sheet. Graphically this looks as follows:
[16] The principle of ‘Multiple sheets’
‘Set’ produces one copy for each sheet in a set and then continues with the next
copy of the entire set, as follows:
[17] The principle of’Set’
See ‘Make a set copy’ on page 111.
The input mode Matrix copy enables you to create several print jobs out of one
scanned set. See Chapter , ‘Océ Matrix Logic® introduction’ on page 112.
The current input mode can be closed by pressing the Stop key.
The currently selected input mode is indicated by the ‘ ● ’ symbol.
▼ Select the input mode
1 Select the ‘Feeding’ card in the ‘Original’ section.
2 Select the input mode with the ‘Input mode’ function key.
1 1 1 2 2 2 3 3 3 4 4 4
1 2 3 1 2 3 1 2 3 1 2 3