IBM Oce TDS800 - Manual (Page 51)

Using the Océ TDS800 to Copy 51
Print section
The ‘Print’ section contains all settings for the printer output, the print (see
Figure 12 on page 51). The settings are divided over the following cards.
■
Image
■ Layout
■
Finishing
■
Sheet
[12] The cards of the ‘Print’ section at the left side with an active ‘Finishing’ card.
File section
The ‘File’ section contains all settings for the scan-to-file output, the file (see
Figure 13 on page 51). The ‘File’ section is only available if you have the
scan-to-file option installed (see Chapter 4, ‘Using the Océ TDS800 to
scan-to-file’ on page 67).
[13] The cards of the ‘File’ section at the left side with an active ‘Destination’ card.