IBM Oce TDS800 - Manual (Page 63)

Using the Océ TDS800 to Copy 63
Note: If the copy job requires more sheets, the display will ask you to feed
the next sheet.
10 Repeat steps 7 to 11 to complete the job.
11 Collect your output.
Stop a job
Pressing the Stop key interrupts the original transport.
▼ How to stop a job
1 Press the Stop key.
The original transport is now stopped and you are prompted to open the
scanner cover in order to remove the original.
2 Open the cover.
3 Remove the original.
4 Close the cover.
You are now ready to start the next copy job.
Interrupt a job
Press the Job interrupt key on the scanner operator panel to give extra priority
to a copy job. When you press the Job interrupt key your copy job will be
placed on top of the printing queue. When you select Job interrupt a message
appears on the scanner panel display (see ‘Feedback on the scanner panel
display when Job interrupt is selected.’ on page 63).
An interrupt job will interrupt a copy job at page level. You can create many
interrupt jobs, but an interrupt job cannot interrupt another interrupt job.
[22] Feedback on the scanner panel display when Job interrupt is selected.