IBM Oce TDS800 - Manual (Page 263)

263
Safety data sheet Océ E1 toner
continued on the next page
MATERIAL SAFETY DATA SHEET Number E-198-b-UK
(93/112/EEC and ISO 11014-1) Date July 1997
Page 1 of 2
Océ E1 Toner
1. Product and company identification
Product name Océ E1 Toner
Packing Polyethylene bottle, contents 1,0 kg /2.1 lb
Company Océ (UK) Ltd.
Address Langston Road, Loughton, Essex IG10 3SL
Telephone 0181-508 5544 (contact product safety coordinator)
Telefax 0181-508 6689
2. Composition / information on ingredients
3. Hazards identification
In a toner dust cloud the formation of an explosive dust-air mixture is possible.
Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard
in normal use.
4. First aid measures
Eyes contact Rinse with plenty of water.
Skin contact Wash with cold water and soap.
Inhalation Clean nose, mouth, throat. Cough up. Fresh air.
Ingestion Rinse mouth with water. If large quantity swallowed seek medical advice.
For any medical advice take along this material safety data sheet.
5. Fire fighting measures
Extinguishing media Dry chemical, carbon dioxide, water spray (fog), foam
Special fire fighting precautions N.A.
Hazardous products of decomposition N.A.
6. Accidental release measures
Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.
7. Handling and storage
Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust. Keep in a cool dry place (38 o C, 100 o F).
Keep away from direct sunlight or heating devices.
No special technical measures for storage.
8. Exposure controls / personal protection
No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
Threshold Limit Value for nuisance dust: 10 mg/m
3 .
Threshold Limit Value for carbon black: 3,5 mg/m 3 .
Threshold Limit Value for amorphous silica: 10 mg/m 3 .
Ingredients CAS No. ClassiÞcation Weight %
Polyester resin 170831-75-1 25-50
Iron oxide 1317-61-9 25-50
Phenoxy resin PMN P-95-461 10-25
Carbon black 1333-86-4 1-5
Amorphous silica 68611-44-9 <1