IBM Oce TDS800 - Manual (Page 195)

Media and supplies 195
6 Hit the bottom of the bottle.
Note: Just add one bottle at a time.
7 When the bottle is empty, remove the bottle.
8 Close the fill opening
9 Lift top cover and pull the hinge towards you to close the top cover (see
Figure 101).
[101] Close the top cover
10 Fasten the cap on the empty toner bottle. The Océ service engineer takes the
empty toner bottles with him at the next visit.
Attention: If you have spilled some toner, (see ‘Safety data sheet Océ E1
toner’ on page 263) for information about disposal and cleaning.