IBM Oce TDS800 - Manual (Page 102)

102 Océ TDS800 User Manual
▼ Copy with removed filing strips along the leading and trailing strip
1 Open the ‘Sheet’ card in the ‘Original’ section.
2 Press the ‘Remove strip’ function key.
[50] Removing strip
3 Adjust the values for the trailing strip using the numeric or arrow keys.
4 Press the ‘Remove strip’ function key again.
5 Adjust the values for the leading strip using the numeric or arrow keys.
6 Make other settings as required.
7 Feed the original.
▼ Copy with added filing strips along the leading and trailing strip
1 Open the ‘Layout’ card in the ‘Print’ section.
2 Press the function key ‘Add strip’ function key.
[51] Adding strip
3 Adjust the values for the trailing strip using the Numeric or Arrow keys.
4 Press the function key ‘Add strip’ again.
5 Adjust the values for the leading strip using the Numeric or Arrow keys.
6 Make other settings as required.
7 Feed the original.