IBM Oce TDS800 - Manual (Page 188)

188 Océ TDS800 User Manual
Load rolls of media
The Océ TDS800 has three paper roll compartments with each two rolls. The
rolls one, three and five have a roll loader. Each of the rolls can be loaded with
media of a different size or type. The operator panel displays the width and the
type of media on each roll.
If you load new media, you must indicate to the system which type of media
you have loaded: paper, transparent, vellum or polyester. The roll width is
detected automatically.
The definition of the new media is important when ‘Automatic roll switch’ is
on.
▼ Load paper
1 Open the correct paper roll compartment (see Figure 91).
[91] Open the correct paper roll compartment
2 If necessary clear the chip tray (see ‘Clear the chip tray’ on page 193)).
3 Remove the roll holder from the paper roll compartment.