IBM uPD78082 - Manual (Page 259)

236
APPENDIX A DEVELOPMENT TOOLS
A.3.2 Software (1/3)
SM78K0 This simulator can debug target system at C source level or assembler level while simulating
System simulator operation of target system on host machine.
SM78K0 runs on Windows.
By using SM78K0, logic and performance of application can be verified without in-circuit emulator
independently of hardware development, so that development efficiency and software quality can
be improved.
This simulator is used with optional device file (DF78083).
Part Number:
µ
S
ЧЧЧЧ
SM78K0
Remark
ЧЧЧЧ
of the part number differs depending on the host machine and OS used. Refer to the table below.
µ
S
ЧЧЧЧ
SM78K0
ЧЧЧЧ Host Machine OS Medium
AA13 PC-9800 Series MS-DOS 3.5-inch 2HD
(Ver. 3.30 to 6.2 Note )
+
Windows (Ver. 3.0 to 3.1)
AB13 IBM PC/AT and their Refer to A.4 3.5-inch 2HC
compatible machines
(Windows in Japanese)
BB13 IBM PC/AT and their
compatible machines
(Windows in English)
Note The task swap function is not available with this software through the function is
provided in MS-DOS version 5.0 or later.