Motorola AP-51XX - Manual (Page 570)

AP-51xx Access Point Product Reference Guide 8-236
AP51xx>admin(system.fw-update)>set
Description:
Defines access point firmware update settings and user permissions.
Syntax:
admin(system.fw-update)> set fw-auto enable
admin(system.fw-update)> set cfg-auto enable
admin(system.fw-update)> set file 2.0.0.0-29D
admin(system.fw-update)> set path c:/fw
admin(system.fw-update)> set server 157.235.111.22
admin(system.fw-update)> set user mudskipper
admin(system.fw-update)> set passwd muddy
For information on updating access point device firmware using the applet (GUI), see Updating Device Firmware on page 4-49 .
set fw-auto When enabled, updates device firmware each time the firmware versions are found to be
different between the access point and the specified firmware on the remote system.
cfg-auto When enabled, updates device configuration file each time the confif file versions are
found to be different between the access point and the specified LAN or WAN interface.
file Defines the firmware file name (1 to 39 characters).
path Specifies a path for the file (1 to 39 characters)..
server The IP address for the FTP/TFTP server used for the firmware and/or config file update.
user Specifies a username for FTP server login (1 to 39 characters)..
passwd Specifies a password for FTP server login (1 to 39 characters).. Default is motorola.