Motorola AP-51XX - Manual (Page 403)

8-69
AP51xx>admin(network.wireless.wlan)> create
Description:
Defines the parameters of a new WLAN.
Syntax:
Example:
admin(network.wireless.wlan.create)> show wlan
ESS Identifier :
WLAN Name :
802.11a Radio : available
802.11b/g Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
Security Policy : Default
MU Access Control :
Kerberos User Name : Default
Kerberos Password : ********
Disallow MU to MU Communication : disable
Use Secure Beacon : disable
Accept Broadcast ESSID : disable
create
show wlan Displays newly created WLAN and policy number.
set ess Defines the ESSID for a target WLAN.
wlan-name Determines the name of this particlular WLAN (1-32).
11a Enables or disables access to the access point 802.11a radio.
11bg Enables or disables access to the access point 802.11b/g radio.
mesh Enables or disables the Client Bridge Mesh Backhaul option.
hotspot Enables or disables the Hotspot mode.
max-mu Defines the maximum number of MU able to operate within the WLAN
(default = 127 MUs).
security Sets the security policy to the WLAN (1-32).
acl Sets the MU ACL policy to the WLAN (1-32).
passwd Defines a Kerberos password used if the WLAN’s security policy uses a
Kerberos server-based authentication scheme.
no-mu-mu Enables or disables MUs associated to the same WLAN to not
communicate with each other.
sbeacon Enables or disables the AP-51xx from transmitting the ESSID in the
beacon.
bcast Enables or disables the access point from accepting broadcast IDs from
MUs. Broadcast IDs are transmitted without security.
qos Defines the index name representing the QoS policy used with this
WLAN.
add-wlan Apply the changes to the modified WLAN and exit.