Motorola AP-51XX - Manual (Page 487)

8-153
AP51xx>admin(system.access)>set
Description:
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.
Syntax:
For information on configuring access point access settings using the applet (GUI), see Configuring Data Access on page 4-9 .
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout Sets the applet timeout. Default is 300 Mins.
cli Defines CLI Telnet access parameters. Enables/disables access from lan
and wan.
ssh Sets the CLI SSH access parameters.
auth-timout Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.
inactive-timeout Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
snmp Sets SNMP access parameters.
admin-auth Designates a Radius server is used in the authentication verification.
server Specifies the IP address the Remote Dial-In User Service (RADIUS) server.
port Specifies the port on which the RADIUS server is listening. Default is 1812.
secret Defines the shared secret password for RADIUS server authentication.
mode Enables/disables the access point message mode.
msg Defines the access point login message text.