Motorola AP-51XX - Manual (Page 246)

AP-51xx Access Point Product Reference Guide 6-28
2. Refer to the Global Firewall Disable field to enable or disable the access point firewall.
3. Refer to the Timeout Configuration field to define a timeout interval to terminate IP address
translations.
Disable Firewall Select the Disable Firewall checkbox to disable all firewall
functions on the access point. This includes firewall filters, NAT, VP,
content filtering, and subnet access. Disabling the access point
firewall makes the access point vulnerable to data attacks and is
not recommended during normal operation if using the WAN port.
NAT Timeout Network Address Translation (NAT) converts an IP address in one
network to a different IP address or set of IP addresses in a
different network. Set a
NAT Timeout interval (in minutes) the
access point uses to terminate the IP address translation process
if no translation activity is detected after the specified interval.